The stainless steel 304 flanged expansion joint is calculated to be equivalent to the main tensile reinforcement, and only needs to be equipped with temperature reinforcement. The profiled steel sheet itself provides a flat ceiling surface for the concrete floors. After installation, the stainless steel 304 flanged expansion joint can be used as a working platform for workers, tools, materials and equipment. The corrugated spacing of stainless steel 304 flanged expansion joints has pre-machined grooves, which can be used for power, communication and other projects. The constant load of the whole structure is reduced, saving the foundation cost of the lower part. During the construction stage, the stainless steel 304 flanged expansion joint can enhance the lateral stability of the supporting steel beam. Give full play to the mechanical properties of steel and concrete.
The stainless steel 304 flanged expansion joint is placed in the pipeline, and the angle code is used as the connecting piece between the pipeline and the stainless steel 304 flanged expansion joint. When using, install the stainless steel 304 flanged expansion joint in the corner of the outer wall of the pipeline. The size of the stainless steel 304 flanged expansion joint is determined. The surface of the stainless steel 304 flanged expansion joint adopts anti-corrosion paint to reduce the surrounding environment. Corrosion of flanged expansion joints. When the stainless steel 304 flanged expansion joint is corroded, the pipe block can be knocked off, and the stainless steel 304 flanged expansion joint can be re-installed, so as to avoid the corrosion of the stainless steel 304 flanged expansion joint affecting the structure of the structure. It also solves the difficulty of replacing the previous stainless steel 304 flanged expansion joints.
First of all, the surface needs to be treated to ensure that there is no dust and other debris on the surface, and then the storage environment should be placed in a dry place as much as possible, and should not be placed in a humid environment, and then some strong acid and alkali substances should be avoided. It can prevent the surface from reacting and damage the protective layer on the surface, which will cause the stainless steel 304 flanged expansion joint to corrode, so it is very necessary for ordinary protection. Stainless steel 304 flanged expansion joints and correct operation use stainless steel 304 Flanged expansion joints can also prolong the service life of stainless steel 304 flanged expansion joints in pipelines.
When the stainless steel 304 flanged expansion joint is finished, the stainless steel 304 flanged expansion joint can be welded. Before welding, it is necessary to check the quantity and variety of steel bars to see if they meet the design and national specifications. For example, the thickness of the steel plate should be greater than 0.6 times the diameter of the steel bar, the diameter of the stainless steel 304 flanged expansion joint should not be less than 6mm, and the diameter of the stressed anchor bar should not be less than 8mm. To find out the cause and solve it properly, the welding work can be carried out.
Post time: Jun-27-2022