Low MOQ for bearing for shaft - Standard Gas for EGCS instruments calibration – Yanger

Short Description:

Product Detail

Product Tags

Feedback (2)

We now have our individual sales group, layout team, technical team, QC crew and package group. Now we have strict high-quality control procedures for each procedure. Also, all of our workers are experienced in printing discipline for Marine CAT5E/6/6A/7/7A, SICK Marsic300 spare parts, Plate cooler for marine scrubber, If possible, please send your requirements with a detailed list including the style/item and quantity you require. We will then send our best prices to you.

Low MOQ for bearing for shaft - Standard Gas for EGCS instruments calibration – Yanger Detail:

Overview

Calibration gas mainly used in the calibration and detection of petrochemical process control instruments, the quality control of petrochemical products, environmental pollutant detection, exhaust emission detection of automobile and ships, the detection of various factory exhaust gases, the calibration of mine alarms, and the calibration of medical instruments inspection, power system transformer oil quality inspection, air separation product quality control, traffic safety inspection instrument calibration, geological prospecting and seismic monitoring, metallurgical analysis, gas appliance experiment and calorific value analysis, chemical fertilizer industry instrument calibration, etc.

Note:
● The bottled gas product is a high-pressure filling gas, and it should be used after decompression and depressurization.
● The packaged gas cylinders have a service life limit, and all expired gas cylinders must be sent to a department for safety inspection before they can be used. When exhaust gas is used in each bottle of gas, the residual pressure in the bottle should be kept at 0.5MPa-0.25MPa, and the bottle valve should be closed to ensure gas quality and safety in use.
● Bottled gas products should be sorted and stocked during transportation, storage and use. Combustible gas and combustion-supporting gas should not be stocked together, and should not be near open flames and heat sources, and should be kept away from fire, oil wax, exposure to the sun, or re-throwing. Don’t hit, it is strictly forbidden to start arc on the gas cylinder, and it is strictly forbidden to load and unload savagely.

Advantages
● Accuracy: Free large-scale R&D bases and production and processing sites with reliable value brands
● Stability: high stability of national metrological standard gas
Reliable: establish and operate a comprehensive quality management system for label gas development, production, sales and technical services in stric

Specification

Gas Components	Volume/L
CO2:8%,SO2:160PPM,N2,100ba	4
CO2:8%,SO2:160PPM,N2,100ba	8
NO:0.2%,N2,100bar	4
NO:0.2%,N2,100bar	8
CO2:5.5%, SO2:27ppm,N2,100bar	4
CO2:5.5%, SO2:27ppm,N2,100bar	8
CO2:22.5%,SO2:1800ppm,N2,100bar	4
CO2:22.5%,SO2:1800ppm,N2,100bar	8
High Purity Nitrogen (99.999%)	4
High Purity Nitrogen (99.999%)	8
Pressure Reducing Valve	1

Product detail pictures:

Related Product Guide:

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Low MOQ for bearing for shaft - Standard Gas for EGCS instruments calibration – Yanger , The product will supply to all over the world, such as: Finland, Doha, Wellington, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.

CO2:5.5%, SO2:27ppm,N2,100bar

Expansion Joint

Nitrogen Gas

Nitrogen Gas Cylinders

Piston ring

Rubber Bridge Expansion Joint

Rubber Expansion Joint

Seal air fan

TRANSFORMER

Water quality detector for marine scrubber

We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!

By Ivy from Sydney - 2018.08.12 12:27

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.

By Joanna from Sudan - 2018.12.14 15:26

Write your message here and send it to us